User Manual | 12
1.6
IR Remote Control
The IR remote controller allows you to control the DVR without the mouse or front panel buttons.
To use IR Remote Controller, the ID of the IR Controller must be the same as the ID of the DVR.
Default ID # for DVR and IR Remote Controller is “1”.
If you have more than one DVR you can use one IR remote by setting a unique ID for each DVR.
No.
Buttons
Functions
A
Power
Goes to standby mode or turns on
B
Display
Display single or split screen
C
F/REW
During playback - Moved video 60 seconds
backward.
During pause- Moved video one frame backward.
D
F/ADV
During playback – Moves video 60 seconds
forward.
During pause – Moves video one frame forward.
E
Play
Play or pause the footage in playback
F
REW
Rewind video at different speeds during playback.
G
FF
Fast forward video at different speeds during
playback.
H
Backup
Start backup in live or playback mode.
I
Alarm
Disable alarm operation.
J
Setup
Launch SETUP menu.
K
Audio
Mute, Single, MIX for all channels in single or split
mode.
L
SEQ
Start auto sequencing of the screen in full screen
mode.
M
Lock
Lock all of key function.
N
Record
Start and stop PANIC recording.
O
Search
Go to the search menu.
P
Arrows
Move Up/ Down/ Left/ Right between display
menus.
Q
Select
Select menu or store setup value.
R
ID
When using the controller with more than one
DVR, press ID and the number corresponding to
the DVR’s ID.
S
ESC
During setting - return to previous menu screen.
During playback - exit from playback.
T
Number
pads
select channel (1~9) or enter DVR ID number
U
PTZ
Call a PTZ menu
