Digital Watchdog Compressor DW-CP04 User Manual Download Page 55

Page: 55 / 73

DW-CP04 Manual

01Manual_CP04_05172013

To create a directory with the options shown above, click

Make Directory

. After finishing the

configuration, click

‘Save’

button to apply the change and continue to the next page. Clicking

‘Back’

button will cancel the changes and go back to the previous page. (This service is available only in MJPEG
mode.)

FTP(Buffered) Service Configuration for each Camera

Item

Description

Condition 1 ~ Condition

Select a condition for FTP (Buffered) service to be activated. Up to 3

conditions can be set.

Pre-Alarm Buffer Size

The Buffer size assigned for Pre-Alarm.

Check Video buffer

Click this link to go to Advanced Services for video buffer setup.

Pre-Alarm Images

The number of image frames to store before Alarm.

Post-Alarm Images

The number of image frames to store after Alarm.

Pre-Alarm Speed

This field shows the speed of Pre-Alarm. Configuration can be done in
Advances Services page.

Post-Alarm Speed

Select the speed of Post-Alarm.

Fastest

is the highest value.

After finishing setup, click

‘Save’

button to apply. If you don’t want to change, click

‘Back’.

Summary of Contents for Compressor DW-CP04










































































Search results

Summary of Contents for Compressor DW-CP04

Reviews:

Related manuals for Compressor DW-CP04

Brands by name

Popular brands

Digital Watchdog Compressor DW-CP04, User Manual

Search results

Summary of Contents for Compressor DW-CP04

Reviews:

Related manuals for Compressor DW-CP04

Brands by name

Popular brands