DW-CP04 Manual
01Manual_CP04_05172013
41
8.8. RTP/RTSP
RTSP (Real-Time Streaming Protocol) is a protocol used to transfer video and audio streams over the
network. Any application supporting Standard RTSP can be used for the Compressor server. Quick Time
Player or VLC program can be used, but it may not be supported in an environment within a firewall. There
are two types of usages; one for Unicast address condition and the other for Multicast address condition.
Unicast Address:
Use “
rtsp://network video server ip address/cam0_0
”. For multiple channels, use cam0_x, x (0~3). If there
are multiple modules, use camx_0 x (0 ~ 3).
Multicast Address:
Use “
rtsp://network video server ip address/mcam0_0
”. For multiple channels, use cam0_x, x (0~3). If
there are multiple modules, use camx_0 x (0 ~ 3).
Service
Enable
: Start RTSP service
Disable
: Stop RTSP service
RTSP Port
In normal case, use default port number 554 to connect to RTSP service.
If not using port 554, enter the port number you want to use.
e.g.) port number 445==> rtsp:// network video server ip
address:445/cam0_0
RTP Start Port
The starting number of the port for video transfer. Each time video
transfer connection is made, the port number also increases.
Multicast
Address
Address for multicast video transfer.
The multicast address 0.0.0.0 is for stopping multicast.
Multicast Port
Port number for viewing the video with a multicast address
NOTE: To use ONVIF protocol, RTP/RTSP must be enabled.
