DW-CP04 Manual
01Manual_CP04_05172013
36
8.1.3.
PPPoE Configuration
For PPPoE connection, enter the username and password acquired from your Internet Service Provider
[ISP]. Contact your ISP or your Network Administrator for additional information. Click
“Apply”
to save or
“Back”
to cancel.
8.2. Network Ports
In this configuration page, you can setup the HTTP port for the
Compressor
Server to communicate with the
Client PC. HTTP Port is the network port that is used when a Client PC connects to the
Compressor
Server’s
Web page. It can be assigned between 80 and 65535 and the default value is 80.
8.3. Bandwidth Control
Bandwidth control settings allow you to limit the maximum network traffic used by the Compressor. If it is
enabled, enter the bandwidth limit in Kbps. The maximum data size transferred from the
Compressor
will not
exceed bandwidth limit set. If transferred data is exceeded, part of data will be randomly lost.
If multiple users try to access the Compressor when a bandwidth control is in place, users connected to the
Compressor will share the limited network bandwidth.
