DW-CP04 Manual
01Manual_CP04_05172013
38
8.5. Network Status Notification
The Network Status Notifications menu allows you to setup e-mail notifications when the IP address of the
Compressor changes. This function is available when the Compressor is set to DHCP or PPPoE only. The
following events will trigger an e-mail notification:
When it is set to Dynamic IP on Network Configuration menu, and the Compressor server has been given a
new dynamic IP address and connected to the network.
Or,
When it is set to PPP Client on WAN-Modem menu, and the Compressor server has been connected to the
network with ISP or PPP server.
1. Select
‘
Enable
’
to use the feature.
2. Enter the address of the SMTP server which is needed for email service. If your SMTP server
requires a user ID and a password for authentication, you will have to get them from your ISP or
network admin. Enter the ID and password.
3. In
Sender
field, enter your email address or other meaningful words that will show the message
was sent from the
Compressor
server as a notification.
4. Enter the email addresses of the recipients in the
Recipient
fields. You can send network e-mail
notifications to up to three (3) e-mail accounts.
5. In the
User-Defined Message
box, enter a message to explain why the message was sent.
6. Click
“Apply”
to save settings.
.
Mail Notification
Enable
: Send email
Disable
: Do not send email
SMTP Server
SMTP Server address for email service
Authentication Login
Enable
: user ID and password are required for SMTP
server
Disable
: user ID and password are not required
User ID
User ID for SMTP server
Password
Password for SMTP server
Sender
Email address of Sender
1st / 2nd / 3rd Recipient
Email Addresses of the Recipients (up to 3 accounts)
User Defined Message
Message to be included in the Notification email
