DW-CP04 Manual
01Manual_CP04_05172013
29
Recording Configuration
Built-in Module 0
Camera 1~4
Recording Profile
n/a
n/a
Recording Mode
SD Status Report
Clear Recording Configuration
Delete Recorded Data
Utilities
System Log
n/a
n/a
Save Configuration
Reboot
Factory Default
System Update
6. Quick Configuration
The first time you connect to the DW-CP04, it is recommended to run the quick configuration wizard. This will
guide you through setting up all the main options for the proper operation of your new Compressor.
6.1. Step-1 Server Name Setup
Click Server Name in the Quick Configuration menu
to view the server’s model name, server name, MAC
address, and current firmware and web viewer versions.
In this window, you can adjust the server’s name.
Click ‘Apply’ to save any changes, or ‘Back’ to return to the previous step. See the section
7.1 Server Name
Setup
for more information.
6.2. Step-2 Local Date & Time Configuration
Click Date & Time on System Configuration menu, then Local Date & Time Configuration window will be
displayed. If necessary, you can manually adjust the
Compressor’s date and time, change the time zone or
enable an NTP server connection. Click ‘Apply’ to save any changes, ‘Refresh’ to make sure the changes
have been applied, or ‘Back’ to return to the previous step. See the section
7.2 Local Date & Time
Configuration
for more information.
6.3. Step-3 Network Configuration
The Compressor’s Network Configuration can be done from the IP Installer software, or locally at the server’s
web viewer. To adjust the internet settings, select the connection type (Static, DHPC, or PPPoE). If static IP
is selected, enter the necessary information such as IP address, subnet mask, gateway, DNS 1 and DNS 2.
Click ‘Apply’ to save any changes, ‘Refresh’ to make sure the changes have been applied, or ‘Back’ to return
to the previous step. See the section
8.1 Network Configuration
for more information.
