background image

WIN Series Trouble Shooting Guide 

 

 

8

Message escalation not working. 

 

§ 

Check for proper message escalation 
programming in the mailbox Voice Messaging 
Data screen. 

§ 

Check the Message escalation flags in 
“Mailbox Initialization Parameters” in the On-
Line Configuration Editor to ensure that the 
type of message you want to escalate has been 
enabled. 

Message notification to a pager is not 
working. 

 

§ 

Check Telephone Line Control to make sure 
the proper line is configured as an outdial port. 
 Make sure the extension connected to this port 
has outside line access enabled in its class of 
service. 

§ 

Check the new message notification sequence 
programming.  Is the desired sequence 
enabled? 

§ 

Is the telephone number to be dialed entered 
properly, including the trunk access code and 
all necessary pauses? (Make sure to enter at 
least one pause after the trunk access code.) 
Make sure to use “M” after the pager 
telephone number to enable the call 
monitoring so the system can detect when the 
paging company answers.  (Note: The number 
of rings used to determine a no answer 
condition is controlled by the mailboxes 
“Number of rings for no answer” parameter in 
the Call Transfer Data menu.) 

§ 

Check to ensure that the Start and Ending 
times are correct and the Days of the week are 
enabled as desired.  

Keep these parameters 

in mind when performing test calls.

 

§ 

If all of the above are correct, turn on the line 
trace on the outdial port and monitor that port 
with your test set while it is attempting to 
outdial.  Make a note of what you see on the 
trace and what you hear. 

§ 

NOTE: If the WIN goes off hook to outdial 
and it does not hear dial tone, the WIN will 
assume it “crashed” with an incoming call and 
start playing the Main Greeting.  When the call 
is completed the port will attempt the outdial 
again. 

Message Waiting lights not working 

 

§ 

Check the line control parameters to ensure the 
proper port is configured with outdial enabled. 

Summary of Contents for WIN Series





















Reviews: