manualshive.com logo in svg

Digital Security Controls WLS9000, Manual

Share
Download
Digital Security Controls WLS9000 Manual Download Page 75

Digital Security Controls Ltd.

                  

75

                                               Private and Confidential

Installation Manual

DATE :  09/30/97

DRAFT

15.0   Document Revision Endnotes

Note #

Revision

Section

Changes

                                                     

i

 

1.01

Section 4.3

Added new plastic numbers for Deflector and interface plate.

ii

 

1.01

Section 4.3

Added the Acuity microphone shroud to the Plastic section.

iii

 

1.01

Section 5.2.1

Elaborated on Status.

iv

 

1.01

Section 5.2.1

Elaborated on the Volume Function Key.

v

 

1.01

Section 5.2.2.2

Removed “TBD” and replaced with “no presets” for the label
programming of the Panic Pendant.

vi

 

1.01

Section 5.2.8

Changed section of Alarm Tone Period to Section [807], Sub [030].

vii

 

1.01

Section 5.2.13

Added Function Key Programming in the ESCORT.

viii

 

1.01

Section 5.2.14

Added new log for Module Placement Test Unsuccessful.

ix

 

1.01

Section 8.1

Changed Hardware Default to use Green to Black.

x

 

1.01

Section 8.2.1

Removed Zone Definitions 7 and 8.

xi

 

1.01

Section 8.2.6

Redefined the Hardwired Zone Loops’ location/programming.

xii

 

1.01

Section 8.2.7

Updated the Annunciation Options.

xiii

 

1.01

Section 8.2.9

Changed the Wireless Bit = OFF to Not Used.

xiv

 

1.01

Section 8.2.18

Added function key programming.

xv

 

1.01

Section 8.2.17

Exchanged Sections 992 and 999 (999 now defaults all; 992
defaults the Controller).

xvi

 

1.01

Section 9.1

Changed the DLS-3 version from v1.10 to v1.20; added the Driver
Pack, and removed DLS-1 support.

xvii

 

1.01

Section 10.0

Moved Function Key Programming.

xviii

 

1.01

Section 10.0

Local and Remote Annunciation has been moved from Section
[040] to Section [017].

xix

 

1.01

Section 10.0

Made Zone Definitions 7 and 8 not used.

xx

 

1.01

Section 10.0

Removed redundant 

Not Used

 Reporting Codes.

xxi

 

1.01

Section 10.0

Restructured the Handheld Keypad/WLSKey Function Key Options.

xxii

 

1.01

Section 10.0

Changed Hardwired Zone Programming from the main
programming into Section [804].

xxiii

 

1.01

Section 10.0

Moved Function Key Programming to the ESCORT (Section [807]).

xxiv

 

1.01

Section 10.0

Removed Service Code.

xxv

 

1.01

Section 10.0

Removed [*][5] access and System Access; moved Clock Options
to Bit 1; added Door Chime Control.

xxvi

 

1.01

Section 10.0

Removed Programming Lockout Count and Duration.

xxvii

 

1.01

Section 10.0

Moved Alarm Tone Period feature to the ESCORT (Section [030]).

xxviii

 

1.01

Section 10.0

Exchanged Sections 992 and 999 (999 now defaults all; 992
defaults the Controller).

Summary of Contents for WLS9000












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands