Digital Security Controls Ltd.
34
Private and Confidential
Installation Manual
DATE : 09/30/97
DRAFT
00
No Transmission
No Transmission
FF
No Transmission
Auto Rep Code sent
01-FE
01-FE sent
Auto Rep Code sent
[4] Closing Confirmation Options
ON = Closing Confirmation Enabled.
When a Closing reporting code is successfully transmitted to a programmed telephone number, the
keypad will sound a series of 8 beeps to confirm to the end user that the Closing Code was sent and
received.
OFF = Closing Confirmation Disabled.
There will be no keypad ringback when a Closing reporting code is successfully transmitted to a
programmed telephone number.
[5] Talk/Listen Options for Phone Number One/Three
ON = Talk/Listen (PC5928) on Phone #1/3 Enabled.
If Talk/Listen is requested for an event by the PC5928, the panel will request the session on the
next communication on Phone Number 1/3 (via L-Block) to the central station.
OFF = Talk/Listen (PC5928) on Phone #1/3 Disabled.
The panel will not request a Talk/Listen session for an event even if the PC5928 has requested it.
[6] Talk/Listen Options for Phone Number Two
ON = Talk/Listen (PC5928) on Phone #2 Enabled.
If Talk/Listen is requested for an event by the PC5928, the panel will request the session on the
next communication on Phone Number 2 (via L-Block) to the central station.
OFF = Talk/Listen (PC5928) on Phone #2 Disabled.
The panel will not request a Talk/Listen session for an event even if the PC5928 has requested it.
[7] Contact I.D. Options
ON = Contact I.D. Uses Programmed Reporting Codes.
The Contact I.D. communications format will use programmed reporting codes when transmitting
to central station.
OFF = Contact I.D. Uses Automatic Reporting Codes.
The Contact I.D. communications format will use the automatic reporting codes as shown in
Appendix C when transmitting to central station.
Note: The Australian Automatic Contact I.D. is different than that of the Standard Product. Please
see Appendix C for differences.
[8] For Future Use.
8.2.15 Downloading Options
[401] First Downloading Option Code
[1] Downloading Answer Options
ON = Downloading Answer Enabled.
The system will answer calls for downloading if a successful Double call routine is detected. Have
the downloading computer call the system and let the telephone line ring once or twice. After 1 or 2
rings, hang up. If called back within the programmed Double Call Time (000-255 seconds), the
panel will answer on the first ring.
OFF = Downloading Answer Disabled.
The system will not answer incoming calls using the Double Call routine unless the User enables the
DLS window. This option can be enabled by turning Option 2 ON.
[2] DLS Window Options
ON = User Can Enable DLS Window.
