Digital Security Controls Ltd.
6
Private and Confidential
Installation Manual
DATE : 09/30/97
DRAFT
•
Microcontroller for annunciation control and interface to the WLS9000.
This siren may be used for:
•
High Volume Siren via Piezo (for Alarm Annunciation)
•
Entry/Exit Delay Beeps (like the WLS-903)
•
Central Station Talk/Listen (via mic and speaker)
•
All
Audio
Annunciation.
There are four terminals used for the Remote Siren. They are:
•
Vcc
(Red)
•
Ground
(Black)
•
Audio Carrier (Yellow)
•
Data
Line
(Green)
4.1.11 Microphone for Central Station Talk/Listen
A microphone on the WLS9000 is used in conjunction with the on-board speaker for
Central Station Talk/Listen.
4.1
Terminal/Jack Connections
The WLS9000 has the following terminal connections:
•
Four terminals for the Remote Sounder = This interface will use a four wire connection.
•
Two terminals for AC Power – A 9V (@ 20VA) transformer is used as the source of AC at these terminals.
•
Double Battery Leads for wiring the batteries in parallel.
•
Two terminals for two Hardwired (EOL) Zone Loops. The common is shared with the Remote Sounder Interface.
•
PC-LINK Header for Local Downloading
Four Terminals for the Telco Interface (Tip/Ring/T1/R1)
4.4 Miscellaneous
The WLS9000 is shipped with a removable overlay to assist the installer through the installation
process. This overlay outlines the following aspects of WLS9000 Programming and Installation:
•
The Wizard’s “Yes” and “No” Programming Methodology.
•
Function Key 1-6’s Hexadecimal Capabilities.
•
Function Key 7’s “Backward” Function.
•
Function Key 8’s “Forward” Function.
•
Accessing the configuration wizard.
•
Hardwired Zone Configuration.
4.3 Plastics
The WLS9000 requires all new plastics. The complete WLS9000 project comprises of the following plastics parts:
•
Front Housing (08-843)
•
Rear Housing w/Made in Canada (08-844)
•
Rear Housing without Made in Canada – used Internationally where required (08-845)
•
Wall Mount Backplate (08-846)
•
Front Bezel (08-847)
•
Front Bezel Sound Deflector (08-1056)
•
LED
Pipe
(08-848)
•
Rear Housing w/Made in Canada for Deskmount (08-926)
•
Rear Housing without Made in Canada for Deskmount (08-927)
•
Deskmount Interface Plate (08-1057)
i
