Digital Projection TITAN XG-500, User Manual

Page: 70 / 120

Page 4.28 Rev C March 2008
4. Controlling the projector Digital Projection TITAN XG-500 User Manual
Notes
When using the menus, press
OSD or to hide or
reveal the On-Screen-Display.
Colour Menu
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
Read these notes on Colour
and Global Colourimetry
before making any settings in
the Colour menus.
Colour menu
To return to the main menu , press up to three times.
From the main menu:
Press and until Colour is highlighted.
Press to open the Colour menu. The blue highlight moves to the fi rst item in
the menu.
•
Notes on Colour and Global Colourimetry
Global Colourimetry menu (see later in this section, in Setup menu)
After a calibration check on the projector or venue, a set of Global colour settings
can be made in the
Global Colourimetry menu. These settings are then available
to be copied at any time using the Colour Mode setting in the Colour menu, or
used as a starting point using the Trim feature in the Colour menu.
Colour menu (see this section) .
The settings made in the Colour menu will be automatically saved in the Mode
History , or can be manually saved to one of the Input Presets (see Input modes
and settings earlier in this section).
The selections available in Colour Mode in the Colour menu are:
Global Copies the settings made in the Global Colourimetry menu
Temperature Set the colour temperature using the slider
User Set the Red, Green and Blue Lift and Gain using the sliders
Peak Preset high brightness setting