Rev C March 2008
Page 4.25
Digital Projection
TITAN XG-500
User Manual
4. Controlling the projector
Notes
Horizontal and Vertical
Aspect Ratio
adjustments are
available only when
User
is
selected in
Aspect Ratio
, (see
previous page).
Keystone
adjustment can be
found in both the Geometry and
Projector Setup menus.
Phase
adjustment can be
found in both the Picture and
Geometry menus, and is
available for graphics based
RGB sources only.
User Horizontal Aspect Ratio
Press
and
to select User H Aspect.
Press
and
to adjust the slider (internal number – adjust to
fi
t).
User Vertical Aspect Ratio
Press
and
to select User V Aspect.
Press
and
to adjust the slider (internal number – adjust to
fi
t).
Keystone
Used to correct for distortion caused by the projector being mounted higher or lower
than the screen.
Press
and
to select Keystone.
Press
and
to adjust the slider (-128 to +127).
Phase
Phase should be set automatically by the projector, but can be adjusted manually to
correct for shimmering or poor quality de
fi
nition on, for example,
fi
ne text.
Press
and
to select Phase.
Press
and
to adjust the slider (0 to 32).
•
•
•
•
Geometry menu continued
Summary of Contents for TITAN XG-500
