Rev C March 2008
Page 4.7
Digital Projection
TITAN XG-500
User Manual
4. Controlling the projector
Indicators
Input status indicators
The indicator next to each input connector on the input panel will light as follows:
off
= input not selected
green
= input selected, signal detected and in range
fl
ashing green
= input selected, but signal
not
detected or out of range
Notes
There are more indicators on
the Control panel, and these are
described on the next page.
Input 4. is not used on this
projector.
5. Composite Video
6. S-Video
7. Component
1. RGB1
2. RGB2
3. DVI
Summary of Contents for TITAN XG-500
