Digital Projection TITAN XG-500, User Manual

Page: 50 / 120

Page 4.8 Rev C March 2008
4. Controlling the projector Digital Projection TITAN XG-500 User Manual
The control panel
Keypad layout
The controls on the keypad are identical to those at the top of the remote control,
and are described on the following pages.
Projector status indicators
The indicators on the control panel are as follows:
Power off = NO POWER
green = normal RUNNING mode amber = STANDBY mode
Shutter amber = CLOSED green = OPEN
Error off = NO ERROR
fl ashing = ERROR (temperature) steady = ERROR (voltage)
IR blue fl ash = Remote control command received
Lamp 1 off = OFF
fl ashing red = LAMP ERROR green = ON (100%) amber = (80 - 99%)
fl ashing green/amber = LAMP COOL-DOWN or WARM-UP
Lamp 2 off = OFF
fl ashing red = LAMP ERROR green = ON (100%) amber = (80 - 99%)
fl ashing green/amber = LAMP COOL-DOWN or WARM-UP
Notes
Many features are controlled
from the menus using the menu
navigation keys on the remote
control or keypad.
For more information about
using the menus, see later in
this section,
Using the menus .
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys at the bottom of
the remote control.
Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
using the control keys, see
later in this section,
Using the
control keys .