Maintenance Manual Removal and Replacement
____________________________________________________________________________________________
4.3.5 Rear Cover Parts
1) Remove the ASF cover by simply extracting it from the main rear cover.
2) Unscrew the four screws securing the main rear group (two on left and right printer
side, the other two on the rear side under the ASF cover).
3) Remove the main rear cover by extracting it from the rear side.
4) Extract the rear tractor cover with the interlock board by simply extracting them from
the main rear cover.
5) Extract the paper stacker covers by simply unhooking them from the main rear cover.
6) Extract the paper knob by simply pulling it out from the platen axis.
Replace the Main Rear Cover Parts following the above instructions in reverse order.
Figure 4.5 Main Rear Cover Parts
____________________________________________________________________________________________
LA400 Multiprinter 4. 8 ER-LA400-SV
