Maintenance Manual Options
____________________________________________________________________________________________
ASF INSTALLATION
1) Remove the ASF rear cover by simply extracting it from the main rear cover.
2) Remove the upper antinoise cover by simply extracting it from the main rear cover
and install the new one in the same position (item 3 of fig. 8.1).
3) Remove the two slot covers with the paper deflector for output stacker installation by
simply unooking them from the top cover.
4) Locate the two grooves on the metal base frame of the mechanical assy.
In these grooves you have to insert the two metal hooks of the ASF support (item 6 of
fig. 8.1).
OUTPUT STACKER INSTALLATION
5) Locate the connector which provides the connection of Output Stacker board with the
Main Board through the Paper Stacker Cable on the right side of the top cover.
- Install the output stacker inserting the grooves (item 8 of fig. 8.1) in the dedicated
pins present on the basic mechanism.
- Slowly insert the board edge (item 7 of fig. 8.1) in the connector until the stacker
clicks.
- Connect the bin cable (item 9 of fig. 8.1) in the proper connector present in the
right side of output stacker.
To remove the output stacker, open the two metal supports of the Output Stacker (item 8
of fig. 8.1) by acting on the two proper black levers and extracting it.
Figure 8.3 ASF Installation (rear view)
____________________________________________________________________________________________
LA400 Multiprinter 8. 4 ER-LA400-SV
