9
2.3
PLAYBACK MODE
1
To place the unit in the playback mode, headphones must be inserted into the headphone jack.
To begin playing a track:
Press the REC/PLAY/STOP button.
or
If using a harness, slide the ON/OFF switch to the “ON” position.
The unit will begin playing the first track (track “1”) recorded on the unit.
To stop playing a track:
Press the REC/PLAY/STOP button.
or
If using a harness, slide the ON/OFF switch to the “OFF” position.
To listen to another track:
Step 1: Stop the playback (see above).
Step 2: Press the FFWD button to select a higher number track, or press the REW button to select a
lower number track.
The LCD will indicate the current track number. After 30 seconds of the playback being stopped, the
SSABR will automatically power-off.
2.4
LOCAL ERASE
The local erase feature is provided as a means of erasing the contents of the flash memory in the event
that the SSABR unit is compromised, or when the recorded contents of the SSABR are no longer
needed. It is suggested that if you fear the SSABR unit might fall into unwanted hands that you
disable the ability to play back the recorded audio locally (see Section 4.4.3). If the Configuration and
Download Utility has enabled the Local Erase feature (Section 4.4.3), it can be started in one of two
ways.
To start the Local Erase in Normal Mode:
Press and hold down all the SSABR buttons (REW, FFWD, REC/PLAY/STOP) for three seconds.
To start the Local Erase in Button Safeguard Mode:
Step 1: Press and hold the REW button until “-go-” appears on the LCD.
Step 2: While continuing to hold the REW button, press and hold the FFWD and
REC/PLAY/STOP buttons for three seconds
2
.
Once the erase begins, the SSABR LCD will display a series of rapidly decrementing numbers. These
numbers represent sections of recorded flash memory that are being erased. When the numbers
decrement to zero, the erase will be complete.
1
Local playback may be disabled using the security features available in the Configuration and Download Utility (see
Section 4.4.3)
2
The ON/OFF slide switch on the external harness is attached and in the ON position, only the FFWD button need be
depressed and held along with the REW button.
