DigiDesign DigiRack Manual Download

Page: 89 / 143

Chapter 6: DigiRack Real-Time TDM and RTAS Plug-ins

Surround Display

SurroundScope detects the multi-channel for-
mat of the track and displays each channel in
the signal in a circle around the Surround Dis-
play.

The Surround Display generates a composite im-
age that indicates relative signal strength in the
displayed channels.

◆

A circle in the center of the display indicates a

surround signal that is panned equally to all
channels.

◆

An irregular shape that is closer to one side of

the display indicates that the channels on that
side have a stronger signal.

◆

A teardrop shape that points toward a single

channel indicates that the signal is panned to
that channel.

PhaseScope

PhaseScope is a multichannel metering plug-in
that provides signal level and phase information
for stereo tracks only. (Mono and LCR or greater
multichannel tracks are not supported.)

SurroundScope Surround Display (5.0 shown)

PhaseScope

Lissajous Meter Display

Meters

Display Options

Phase/Leq(A) Display

Summary of Contents for DigiRack
















































































































































Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands

DigiDesign DigiRack, Manual

Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands