DigiDesign DigiRack, Manual

Page: 49 / 143

Chapter 6: DigiRack Real-Time TDM and RTAS Plug-ins 43
chapter 6
DigiRack Real-Time TDM and RTAS Plug-ins
EQ III
The EQ III Plug-in provides a high-quality
7 Band, 2–4 Band, or 1 Band EQ for adjusting
the frequency spectrum of audio material.
EQ III is available in the following formats:
• 7 Band: TDM, RTAS, AudioSuite
• 2–4 Band: TDM and RTAS only
• 1 Band: TDM, RTAS, AudioSuite
EQ III supports all Pro Tools session sample
rates: 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz,
48 kHz, and 44.1 kHz. EQ III operates as a mono
or multi-mono plug-in only. Stereo and multi-
channel tracks are supported through multi-
mono operation.
EQ III can be operated from the following con-
trol surfaces:
• Digidesign D-Control
• Digidesign ProControl
• Digidesign Control|24
• Digidesign 002
• Digidesign Command|8
• Mackie HUI-compatible controllers
EQ III has a Frequency Graph display that shows
the response curve for the current EQ settings
on a two-dimensional graph of frequency and
gain. The frequency graph display also lets you
modify frequency, gain and Q settings for indi-
vidual EQ bands by dragging their correspond-
ing points in the graph.
By choosing from the 7 Band, 2–4 Band, or
1 Band versions of the EQ III plug-in, you can
use only the number of EQ bands you need for
each track, conserving DSP capacity on
Pro Tools|HD systems.
EQ III Configurations
The EQ III Plug-in appears as three separate
choices in the plug-in insert pop-up menu and
in the AudioSuite menu:
7 Band (“7-Band EQ 3”)
2–4 Band (“4-Band EQ 3”)
1 Band (“1-Band EQ 3”)