DigiRack Plug-ins Guide
40
3
Adjust the plug-in controls for the effect you
want. These settings determine how the file is
processed and what effect the processing has on
the original regions.
Follow these guidelines:
• To process the selected region only in the
track in which it appears, select Playlist
from the Selection Reference pop-up. Alter-
natively, if you want to process the selected
region in the Audio Regions list only,
choose Region List from this pop-up.
• If you want to process and update every oc-
currence of the selected region throughout
your session, enable the Use In Playlist but-
ton (and also select Region List from the Se-
lection Reference pop-up). Alternatively, if
you do not want to update every occur-
rence of the selected region, deselect the
Use In Playlist button.
• To configure the plug-in for destructive
processing, select Overwrite Files from the
File Mode pop-up menu. This will over-
write and permanently modify the original
source audio files.
• Alternatively, to configure the plug-in for
nondestructive processing, select Create
Individual Files from the File Mode pop-up
menu. This will create new audio files that
have been processed with the AudioSuite
Plug-in and leave the original source audio
files untouched.
• If you have selected multiple regions for
processing and want to create a new file
that connects and consolidates all of these
regions together, select Create Continuous
File from the File Mode pop-up menu.
4
Click the Preview button to begin audition
processing of the selected material.
5
Make further adjustment to the plug-in pa-
rameters based if necessary.
6
When you are satisfied with the Preview re-
sults, click the Process button.
The selected audio is processed according to the
settings you have specified. Pro Tools appends
an acronym to the region’s name indicating the
AudioSuite process that has been applied. The
new audio files then appear in your session.
Using AudioSuite Plug-ins in
Stereo
Some AudioSuite plug-ins can be used in either
mono or stereo. If you plan to use them in ste-
reo, be aware of the following:
◆
To process a mono track and obtain a stereo
result, select the desired track or region plus an
empty track or region. Then set the plug-in to
Stereo mode and select the Sum Inputs button
(if present) to center the dry signal. When you
process the audio, the result will be two tracks or
regions that represent the right and left chan-
nels of the processed audio. You should then
pan these tracks hard right and hard left in your
mix.
◆
If you set a plug-in to Stereo mode, then select
an odd number of Pro Tools tracks for process-
ing (as opposed to an even number), the plug-in
will process the selected tracks in pairs, in stereo.
However, the last odd, unpaired track will be
processed as mono, using the left channel set-
tings of the stereo plug-in. If you want the last
track to be processed in stereo, you must select
an additional track to pair it with—an empty
one if necessary.
For more information, see “Channel Mode
Button” on page 36.
Summary of Contents for DigiRack
