DigiDesign DigiRack, Manual

Page: 40 / 143

DigiRack Plug-ins Guide 34
Create Continuous File Processes the selected re-
gions nondestructively and creates a new audio
file consisting of the selected regions consoli-
dated into a single, unbroken region. This mode
is particularly useful if you are assembling a
composite track from multiple takes. This mode
is not available when the Selection Reference is
set to Region List.
Process Mode Selector
If you have made a selection that includes mul-
tiple regions, this pop-up menu lets you specify
whether AudioSuite processing is performed on
a region-by-region, or entire-selection basis.
Region by Region
Analyzes each region in a se-
lection individually, rather than over the entire
multi-region selection as a whole.
Entire Selection
Uses the entire selection for
analysis. All regions will be analyzed and pro-
cessed relative to the entire selection.
Chan/Track Process Mode Selector
If you have made a selection that includes re-
gions from multiple tracks, the Normalize
AudioSuite plug-in (as well as some third-party
AudioSuite plug-ins) lets you choose whether
you want to perform processing on a channel-
by-channel/track-by-track, or an all-chan-
nel/all-tracks basis using the Chan/Track Process
Mode selector.
Peak On Each Chan/Track Analyzes and pro-
cesses each selected track individually. If you ap-
ply the Normalize plug-in to multiple tracks or a
multichannel track in Peak On Each Chan/Track
mode, each channel or track will be normalized
independently, without regard to the other se-
lected tracks.
Peak On All Chans/Tracks Uses all currently se-
lected channels and tracks for analysis. If you
apply the Normalize plug-in to a multichannel
track or multiple tracks in Peak On All
Chans/Tracks mode, the tracks will be analyzed
as a single entity and regions will be normalized
relative to the averaged peak level within all se-
lected channels and tracks.
The Create Continuous File option is not
available with some time domain plug-ins.
To achieve a similar result, use the Dupli-
cate plug-in to consolidate regions processed
with these plug-ins.
Process Mode selector (Invert plug-in shown)
Chan/Track Process Mode selector pop-up menu
(Normalize plug-in shown)