DigiDesign DigiRack Page 11 Manual Download

Page: 11 / 143

Chapter 2: Installation and Configuration

chapter 2

Installation and Configuration

Installing Plug-ins

The Digidesign DigiRack plug-ins are installed
when you install Pro Tools. For more informa-
tion about installing Pro Tools, see the

Getting

Started Guide

that came with your system.

If installing multiple packages of plug-ins, do so
in the following order:

DigiRack plug-ins (installed with Pro Tools).

Packs and other bundles included with your

Digidesign system.

Any additional plug-ins. Check with the man-

ufacturer of your plug-ins for compatibility in-
formation and support.

Organizing Plug-ins

You can customize how plug-in lists (plug-in
menus) are organized in the Insert selector and
Plug-in selector.

Use the “Organize Plug-in Menus By” pop-up
menu in the Pro Tools Display Preferences page
to organize plug-in menus in a Flat List (with
plug-ins in alphabetical order), Category, Manu-
facturer, or Category

and

Manufacturer.

Plug-ins organized by categories

Plug-ins organized by manufacturer

Summary of Contents for DigiRack
















































































































































Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands

DigiDesign DigiRack, Manual

Search results

Summary of Contents for DigiRack

Reviews:

Related manuals for DigiRack

Brands by name

Popular brands