DigiDesign DigiRack, Manual

Page: 59 / 143

Chapter 6: DigiRack Real-Time TDM and RTAS Plug-ins 53
High-Mid Peak
The High-Mid Peak band boosts or cuts frequen-
cies centered around the Frequency setting. The
width of the band is determined by the Q set-
ting.
The High-Mid Gain control and its correspond-
ing graph elements are displayed on-screen in
green.
High Shelf/High Peak
The High Shelf/Peak band is switchable between
High Shelf EQ and High Peak EQ functions. By
default, this band is set to High Shelf.
High-Shelf EQ
Boosts or cuts frequencies at and
above the Frequency setting. The amount of
boost or cut is determined by the Gain setting.
The Q setting determines the shape of the shelv-
ing curve.
High Peak EQ Boosts or cuts a band of frequen-
cies centered around the Frequency setting. The
width of the affected band is determined by the
Q setting.
The High Shelf and High Peak Gain controls and
their corresponding graph elements are dis-
played on-screen in blue.
High-Mid Peak EQ
High-Mid Peak EQ control values
Control Value
Frequency Range 200 Hz to 18 kHz
Frequency Default 2 kHz
Mid Peak Q Range 0.1 to 10.0
Mid Peak Q Default 1.0
Mid Peak Gain Range –18 dB to +18 dB
Frequency
control
Band
Enable
button
Gain
control
Q
control
High Shelf EQ (left) and High Peak EQ (right)
High Shelf EQ and High Peak EQ control values
Control Value
Frequency Range 1.8 kHz to 20 kHz
Frequency Default 6 kHz
High Shelf Q Range 0.1 to 2.0
High Peak Q Range 0.1 to 10.0
Q Default 1.0
High Shelf Gain Range –12 dB to +12 dB
High Peak Gain Range –18 dB to +18 dB
High Shelf EQ
button
Frequency
control
Band
Enable
button
Gain
control
Q
control
High Peak EQ
button
Frequency
control
Band
Enable
button
Gain
control
Q
control