DigiRack Plug-ins Guide
44
7 Band EQ and 2–4 Band EQ
The 7 Band EQ is available in TDM, RTAS, and
AudioSuite formats. The 2–4 Band EQ is avail-
able in TDM and RTAS formats only.
The 7 Band EQ and the 2–4 Band EQ share the
same window and identical controls, but with
the 2–4 Band EQ, a limited number of the seven
available bands can be active at the same time.
1 Band EQ
The 1 Band EQ is available in TDM, RTAS, and
AudioSuite formats.
The 1 Band EQ has its own window, with six se-
lectable filter types.
EQ III Controls
Adjusting EQ III Controls
You can adjust the EQ III plug-in controls by
any of the following methods:
Dragging Plug-in Controls
The rotary controls on the EQ III Plug-in can be
adjusted by dragging over them horizontally or
vertically. Dragging up or to the right incre-
ments the control. Dragging down or to the left
decrements the control.
Typing Control Values
You can enter control values directly by clicking
in the corresponding text box, typing a value,
and pressing Enter (Windows) or Return (Mac).
Inverting Filter Gain
(Peak EQ Bands Only)
Gain values can be inverted on any Peak EQ
band by Shift-clicking its control dot in the Fre-
quency Graph display, or its Gain knob in the
plug-in window. This changes a gain boost to a
cut (+9 to –9) or a gain cut to a boost (–9 to +9).
Gain values cannot be inverted on Notch, High-
Pass, Low-Pass, or shelving bands.
7 Band EQ and 2–4 Band EQ window
1 Band EQ window
Dragging a plug-in control
Typing a control value
Summary of Contents for DigiRack
