DigiRack Plug-ins Guide
24
To utilize Tempo Sync:
1
Insert a plug-in that supports Tempo Sync,
such as the DigiRack Mod Delay II.
2
Click the Tempo Sync icon. The tempo shown
will change to match the current session tempo.
3
To set a rhythmic delay, click a note value
(whole, half, quarter, eighth, or sixteenth), then
do any of the following to further adjust the
rhythm:
• To enable triplet delay timing, click the 3
button so that it is lit.
• To set a dotted delay value, click to enable
the dotted icon.
• To apply some swing to the delay value, ad-
just the Groove slider.
Automating Plug-ins
You can automate changes to plug-in controls.
Because Pro Tools creates a separate playlist for
each plug-in control that you automate, you can
later edit and modify each automated control
individually. This lets you to build up complex
automation in stages.
Preference Setting to Auto Enable All
Plug-in Parameters
You can configure Pro Tools to enable all param-
eters for automation when you first assign a
plug-in insert.
To auto-enable all parameters on newly inserted
plug-ins:
1
Choose Setup > Preferences, and click the Mix-
ing tab.
2
In the Automation section, click to select the
Plug-in Controls Default to Auto-Enabled set-
ting.
• When selected, all applicable controls of
newly added plug-ins are enabled for auto-
mation.
• When not selected, the controls of newly
added plug-in must be manually enabled
for automation.
Tempo Sync icon (Mod Delay II shown)
Tempo Sync
To create automation for a stereo plug-in
with separate controls for each channel,
(such as Mod Delay), record the automation
for one channel, then copy and paste it to
the other channel.
For complete instructions on Pro Tools au-
tomation, refer to the
Pro Tools Reference
Guide.
Summary of Contents for DigiRack
