manualshive.com logo in svg

DigiDesign D-Command, Manual

Share
Download
DigiDesign D-Command Manual Download Page 79

Chapter 9: Management Sections

73

Chapter 9: Management Sections

Window Management Section

The Window Management section includes controls for opening and closing Pro Tools windows on-screen. When a window is 
open, its corresponding switch is lit. 

Workspace Browser Switch

The Workspace Browser switch opens and closes the DigiBase 
Workspace Browser. Hold Alt (Windows) or Option (Mac) and 
press this switch to close all DigiBase windows.

MIDI Event List Switch

The MIDI Event List switch opens and closes the MIDI Event 
List or brings it to the front.

Mic Pre Switch

The Mic Pre switch opens and closes the Mic Pre window for 
the focused track.

Memory Locations Switch

The Memory Locations Switch opens and closes the Memory 
Locations window

Transport Switch

The Transport switch opens and closes the Transport window

Pan Switch

The Pan switch opens and closes the Pan window for the fo-
cused track. Hold Alt (Windows) or Option (Mac) to close all 
Pan windows.

Mix Switch

The Mix switch opens the Mix Window or brings it to the 
front.

Edit Switch

The Edit switch opens the Edit Window or brings it to the 
front.

Plug-in Switch

The Plug-in switch opens and closes windows for any cur-
rently targeted plug-ins in the session. Hold Alt (Windows) or 
Option (Mac) to close all plug-in windows.

D-Command Window Management section

Transport switch

Edit switch

Mic Pre switch

Pan switch

Plug-in switch

MIDI Event List switch

Workspace Browser switch

Memory Locations switch

Mix switch

Summary of Contents for D-Command









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands