manualshive.com logo in svg

DigiDesign D-Command, Manual

Share
Download
DigiDesign D-Command Manual Download Page 45

Chapter 6: Channel Strip Controls

39

Automation Write Controls

The Automation Write controls invoke the manual “Write to 
Start/End/All” commands, the automatic “Write to 
Start/End/All on Stop” automation commands, and the 
“Write to Current Parameter” and “Write to All Enabled Pa-
rameters” snapshot automation commands in Pro Tools.

Start Switch

The Start switch writes the current automation value of all 
write-enabled parameters to the start of a selection or track 
when performing an automation pass. 

To manually Write to Start:

„

Press the Start switch during playback.

To enable automatic Write to Start on Stop:

„

Hold the Start key (Windows) or the Control key (Mac) and 

press the Start switch. 

To disable automatic Write to Start on Stop: 

„

Press the flashing Start switch. 

All Switch

The All switch writes the current automation value of all 
write-enabled parameters to an entire selection or track when 
performing an automation pass.

To manually Write to All:

„

Press the All switch during playback.

To enable automatic Write to All on Stop:

„

Hold the Start key (Windows) or the Control key (Mac) and 

press the All switch.

To disable automatic Write to All on Stop:

„

Press the flashing All switch.

End Switch

The End switch writes the current automation value of all 
write-enabled parameters to the end of a selection or track 
when performing an automation pass.

To manually Write to End:

„

Press the End switch during playback.

To enable automatic Write to End on Stop:

„

Hold the Start key (Windows) or the Control key (Mac) and 

press the End switch. 

To disable automatic Write to End on Stop:

„

Press the flashing End switch.

Current Switch

The Current switch writes a snapshot of the current parameter 
value to the currently displayed automation parameter. 

All Enabled Switch

The All Enabled switch writes a snapshot of all current param-
eter values to all enabled automation parameters.

Automation Enable Controls

The Automation Enable controls are used to enable or suspend 
writing of each type of automation on all channels. When 
writing is enabled for a type of automation, its corresponding 
switch is lit. 

These Automation Enable controls mirror the function of the 
corresponding buttons in the Pro Tools Automation Enable 
window. 

Plug-in Switch

The Plug-in switch enables and suspends writing of automa-
tion for any automation-enabled plug-in parameters on all 
tracks in the session.

Automation Write controls

Automation
Write to Start

Write to Current
Parameter

Automation

Write to All

Automation

Write to End

Write to All Enabled
Parameters

switch

switch

switch

switch

switch

Automation Enable controls

Enable Plug-in
Automation

Enable Send Level
Automation

Enable Send Mute
Automation

Enable Volume

Automation

Enable Pan

Automation

Enable Mute

Automation

Enable Send Pan
Automation

switch

switch

switch

switch

switch

switch

switch

Summary of Contents for D-Command









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands