manualshive.com logo in svg

DigiDesign D-Command, Manual

Share
Download
DigiDesign D-Command Manual Download Page 70

D-Command Guide

64

Master Link Switch

Multichannel Plug-ins

When you are working with a multichannel plug-in, all chan-
nels are controlled in tandem, so the Master Link switch has 
no effect, except with multichannel plug-ins (such as 
Focusrite d2) that directly support channel linking.

Multi-Mono Plug-ins

When you are working with a multi-mono plug-in, the Master 
Link switch toggles the Master Link button in the plug-in win-
dow, which links or unlinks all channels of the plug-in. When 
the Master Link button is enabled, the Link switch is lit.

Select/Link/Bypass Mode Switch

The Select/Link/Bypass Mode switch determines the function 
of the Channel Select switches with multi-mono plug-ins. 

Select Mode 

In this mode, the Channel Select switches deter-

mine which channel of a multi-mono plug-in is the focus of 
the plug-in controls. When a channel is selected, its switch is 
lit. If any channels are linked, their switches follow linked be-
havior.

In Select mode, if the D-Command Channel Window Display 
preference is set to Yes, the Channel Select switches also 
change the channel display in the plug-in window. 

Bypass Mode 

In this mode, the Channel Select switches deter-

mine which channels of a multi-mono plug-in are bypassed. 
When a channel is bypassed, its switch is lit. If any channels 
are linked, their switches follow linked behavior.

Link Mode 

In this mode, the Channel Select switches deter-

mine which individual channels of a multi-mono plug-in are 
linked together. Linked channels are indicated by switches 
that are lit.

Summary of Contents for D-Command









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands