DHS Systems 1003080, Technical Manual

Page: 35 / 136

Operation & Maintenance Medium SXGA+ Projection System 0005
Part Number 1006380 0005-1 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
OPERATOR INSTRUCTIONS
MEDIUM SXGA+ PROJECTION SYSTEM
MEDIUM SXGA+ PROJECTION SYSTEM SET-UP/TAKE-DOWN PROCEDURES
This Work Package details site selection, setup, and initial power-up procedures of the DC2E Medium SXGA+
Projection System. It also covers power-down, disassembly, and storing of system.
SITE REQUIREMENTS
To ensure minimal problems and good operation of the Medium SXGA+ Projection System, ensure area is:

Dry

Level with minimum clearing of 6 feet (1.8 m) wide by 88 inches (2.2 m) high by 8 feet (2.4 m) deep for
deployment and operation (see Figure 1).

Free of any obstructions that would interfere with the truss or screen sections.
Front to Back
8 feet
2.4 meter
Side to Side
6 feet
1.8 meter
Top to Bottom
88 inches
2.2 meters
Figure 1. Site Requirements for Front Projection Mode.