DHS Systems 1003080, Technical Manual

Page: 127 / 136

Operation & Maintenance Medium SXGA+ Projection System 0018
Part Number 1006380 0018-1/2 blank DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced for release to a
third party without written consent of DHS Systems LLC.
DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE
MEDIUM SXGA+ PROJECTION SYSTEM
DESTRUCTION PROCEDURES
SCOPE
This work package is for guidance of those whose duty it is to render inoperable or destroy the DC2E Medium SXGA+
Projection System which is in imminent danger of capture by an enemy.
METHOD OF DESTRUCTION
Command decision, according to the tactical situation will determine when the using organization is to destroy a
Medium SXGA+ Projection System. A destruction plan will be prepared by the using organization, unless one was
prepared by a higher authority. For general vehicle destruction procedures, refer to TM 750-244-6, Procedures for
Destruction of Tank Automotive Equipment to Prevent Enemy Use (U.S. Army Tank-Automotive and Artillery
Command).
MEDIUM SXGA+ PROJECTION SYSTEM EQUIPMENT DESTRUCTION PROCEDURES
The following procedures should be followed when time does not permit critical equipment to be destroyed
individually.
Demolition/Explosives
WARNING
Personnel should stand clear of area being destroyed be weapons fire. Always use a
weapon of a caliber sufficient to ensure enough penetration to achieve the desired
damage and to eliminate the possibility of ricochet. Personnel unfamiliar with
explosives should not set or detonate explosives.
The use of explosives has the disadvantage of possible disclosure of position.
The Medium SXGA+ can be destroyed using incendiary grenades, several rounds of properly aimed weapons fire, or
a sufficient amount of explosives.
WARNING
Toxic fumes may result from burning electrical equipment found in the Genset. Fires
should be lit only in open areas. Avoid inhaling fumes from burning components.
Fire
Fires should be started after setting off explosives. Gasoline, kerosene, diesel, or oil may be used to destroy smaller
components such as the Medium SXGA+ Projection System accessories.
END OF WORK PACKAGE