![DHS Systems 1003080 Technical Manual Download Page 122](http://html1.mh-extra.com/html/dhs-systems/1003080/1003080_technical-manual_2492437122.webp)
Operation & Maintenance
Medium SXGA+ Projection System
0016
Part Number 1006380
0016-8
DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
1
2
3
4
Figure 1. Projector Lamp Removal and Replacement.
REPLACEMENT
6. Carefully insert new lamp module (Figure 1, Item 4) into the projector. Ensure lamp module is seated.
7. Using a flat tipped screwdriver, tighten three screws (Figure 1, Item 3) to secure new lamp module.
8. Install lamp module cover (Figure 1, Item 2).
9. Using a flat tipped screwdriver, tighten cover screw (Figure 1, Item 1). Note, do not over-tighten screw.
10. Reconnect power cord to the projector.
END OF TASK
END OF WORK PACKAGE
Summary of Contents for 1003080
