DHS Systems 1003080, Technical Manual

Page: 71 / 136

Operation & Maintenance Medium SXGA+ Projection System 0008
Part Number 1006380 0008-3 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
TIMER
The projector features a real-time clock that enables timing
control. This means that the projector can be programmed to
switch on and off at certain pre-set times during a weekly
cycle. To allow for a flexible schedule, 10 ‘programs’ are
available. With each program, you can define the switch on or
switch off time for a single day (Monday to Sunday), all work
days (Monday through Friday), or week-end (Saturday and
Sunday). One, several or all programs can be active at the
same time as desired. In this way, a flexible scheme can be
established. Observe the 24 hour time format. For more
information, see the SETTINGS > TIMER menu.
The following example illustrates a case where the projector
turns on at 08:00 in the morning (8 am) and switches off at
20:00 (8 pm) on weekdays (Monday through Friday).
Weekends (Saturdays and Sundays), it turns on at 10:00 (10
am) and off at 18:00 (6 pm). VGA is used as the source. For
this, four programs are needed, 2 for on and two for off.