![DHS Systems 1003080 Technical Manual Download Page 17](http://html1.mh-extra.com/html/dhs-systems/1003080/1003080_technical-manual_2492437017.webp)
Operation & Maintenance
Medium SXGA+ Projection System
0001
Part Number 1006380
0001-3
DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
PREPARATION FOR STORAGE OR SHIPMENT
Place items in administrative storage for short periods of time when a shortage of maintenance resources exist. It
should be possible to place items in a state of mission readiness either within 24 hours or within the time frame that
the directing authority may determine. Keep appropriate maintenance records during storage.
Prior to placing the equipment in administrative storage, Army activities perform Preventative Maintenance Checks
and Services (PMCS), complete Equipment Serviceability Criteria (ESC) evaluations, correct shortcomings and
deficiencies, and complete all Modification Work Orders (MWO). When removing Items from administrative storage,
the operator performs PMCS to ensure operational readiness.
Inside storage is preferred for items selected for administrative storage. If inside storage is not available, use trucks,
vans, or other containers
WARRANTY INFORMATION
The Medium SXGA+ Projection System has a limited 1 year warranty, with the following exceptions
•
Deployable Command & Control Equipment Cables: 30 days
•
Deployable Command & Control Equipment Lamps and Bulbs: 500 Hours/ 90 Days
•
Deployable Command & Control Equipment Touch Panels: 90 Days
The warranty starts on the date found in block 23 of DA Form 2408-9, Equipment Control Record. If no DA 2408-9 is
available, the date will be the recorded date of shipment of the equipment from the factory. Report all defects to the
supervisor, who will take appropriate action. Contact the Regional Support Center (RSC) representative for further
information on Warranty items.
NOMENCLATURE CROSS-REFERENCE LIST
Common names and/or abbreviations are used in the manual to make a procedure easier to read. Table 1 matches
the official nomenclatures with the common names or abbreviations.
Table 1. Nomenclature Cross-Reference List.
OFFICIAL NOMENCLATURE
COMMON NAME or ABBREVIATIONS
Audio Visual Switching System
AVSS
Bayonet Neill-Concelman (Connector)
BNC (Connector)
Certified Technology Specialist
CTS
Certified Technology Specialist-Design
CTS-D
Certified Technology Specialist-Installation
CTS-I
Composite Video
CV
D-Subminiature 9-pin (Connector)
DB9 (Connector)
Data Circuit Terminating Equipment
DCE
Deployable Command & Control Equipment
DC2E
Dynamic Host Configuration Protocol
DHCP
Digital Light Processing
DLP
Electromagnetic Interface
EMI
Electrostatic Discharge
ESD
Front Projection Mode
FPM
High-Bandwidth digital Content Protection
HDCP
High-Definition Multimedia Interface (Connector)
HDMI (Connector)
HD15 (Connector)
High Density 15-pin (Connector)
Summary of Contents for 1003080
