DHS Systems 1003080, Technical Manual

Page: 60 / 136

Operation & Maintenance Medium SXGA+ Projection System 0007
Part Number 1006380 0007-8 DHS SYSTEMS, LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
PROJECTED IMAGE TOO HIGH
Use the rear adjusting knurled knob on the projector mount to lower the projected image as required. The front two
adjusting knurled knobs can also be used to lower the projected image.
Figure 12. Image too High.
REMOTE CONTROL
The remote control allows flexible access to the projector settings, either through direct keys, or through the menu
system. The remote control is backlit for use in dark environments. It also has a data-jack that allows for wired
connection to the projector. When the wire is connected, the IR (infra-red) beam and internal batteries are switched
off.
The remote control can be operated in “individual mode”. Individual control is available either by wired remote control,
using the data-jack, or by using an individual number code. For individual control, first set the individual RC ID code
using the projector menu system, see the “SETTINGS” sub menu.
END OF TASK