DHS Systems 1003080, Technical Manual

Page: 117 / 136

Operation & Maintenance Medium SXGA+ Projection System 0016
Part Number 1006380 0016-3 DHS Systems LLC
This document contains information proprietary to DHS Systems LLC and is intended solely for use by its customers. No portion of this document may be reproduced
for release to a third party without written consent of DHS Systems LLC.
CLEANING THE EQUIPMENT CASES
INITIAL SETUP:
Tools and Special Tools
Damp Cloth
Stiff Bristled Brush
Materials/Parts
Equipment Condition
Water Equipment Powered Down
Denatured Alcohol Power Source Disconnected
CAUTION
Use of a damp cloth is authorized for cleaning the case and cables but care should be exercised
to ensure that water does not get into the connection of the cables or the electrical components.
Damage to the components may result from water, if water gets into the connections, blow the
connections out with compressed air, or allow to air dry before connecting back to equipment.
SERVICE
1. Clean off any severe dirt or mud from the outer case using a stiff bristled brush.
2. Use a vacuum or compressed air to remove any loose debris from inside the ancillary case.
3. Clean the outer surface of the case and the interior surface of the case with a damp cloth.
4. Dry any excess water from the inside of the case using a lint free cloth.
END OF TASK