27
Chapter 3 Maintenance
Daily Maintenance
Cleaning after Cutting Operation Ends
After cutting, clean the cutting area using a commercially available brush or dust collector. Carefully remove cutting waste
from the portions of to in particular because the cutting result may be affected if cutting waste remain on them.
Cases Where You Need to Perform This Task
After cutting
When the machine is in the standby state, opening the front cover and pressing the operation button will turn on
the dust collector.
Dust collec-
tion hose
Clean the ionizer using a dust collector. Do not directly
touch the inside of the ionizer.
Screws of the clamp for block
workpieces
Screw of mounting part
Inside of the stocker
of the ATC magazine
Tool sensor
Ionizer
Tool holder and tool
shank portion
Summary of Contents for DWX-4
Page 53: ...R6 171006 FA01214...
