DGSHAPE DWX-4, User Manual

Page: 8 / 53

8
Chapter 1 Operation screen
Description of SETTINGS Window
"Settings" Tab
In this tab, you can make the VPanel auto startup setting and settings related to the NC code, etc. When more than one
machine is connected, the machine selected in the top window is the target of setting.
Run VPanel program at start-up
When a check is put in this checkbox, VPanel is automatically started up at the time when Windows starts up, and VPanel
is displayed in the tasktray.

Initial setting : Checked
NC code with decimal point
Select handling and interpretation of the decimal point for NC code. In the case of "Conventional," the unit is interpreted
as millimeter (or inch) when there is a decimal point, and as 1/1000 millimeter (or 1/10000 inch) when there is no decimal
point. In the case of "Calculator," the unit is always interpreted as millimeter (or inch) regardless of whether or not there
is a decimal point. In the case of "Calculator," select the scope of application. Select an appropriate setting according to
your CAM or NC code.

Initial setting : Conventional
Machine ID
You can set an ID to the machine. You should use this function when connecting more than one machine.

Initial setting : A

"Setup Guide" ("Connecting Multiple Units")
Change the ID according to the procedure of the "Setup Guide."