Starting Cutting
24
Chapter 2 Cutting
Check that a workpiece and a tool have been
mounted on the milling machine, and then click
[OK].
P. 19, "STEP1: Attaching the Workpiece"
The output cutting data is displayed in the output list of the top
window, and cutting starts.
Stopping the Output of Cutting Data
Procedure
In the top window of VPanel, select the machine
that you wish to quit outputting.
Click [Quit cutting].
The message shown in the figure is displayed.
Click [OK] when you cancel the output. Click [Can
-
cel] when you do not cancel the output.
Removing Milling Data in Standby from the Output List
Procedure
In the top window of VPanel, select the machine to edit from the output list.
Right-click the mouse on the milling data to remove
from the output list, and click [Cancel].
Only milling data in standby can be removed (milling data in the second
or following positions from the top of the output list).
Progress of output
Cutting data
Summary of Contents for DWX-4
Page 53: ...R6 171006 FA01214...
