Starting Cutting
21
Chapter 2 Cutting
Workpiece with Pin (S)
Procedure
Close the front cover, and turned the power switch on.
After the initial operation is completed, open the front cover.
Insert the adapter for workpiece with pin into the mounting part.
Attach a workpiece.
Adjust the position of the workpiece by rotating it, and insert it all the way until it stops.
Tighten the mounting screw (L) with a hex-
agonal screwdriver (M).
Adapter for workpiece
with pin
Mounting screw (L)
Rotate and
insert.
Workpiece with pin (S)
Align the dent with the
position of the screw hole.
Summary of Contents for DWX-4
Page 53: ...R6 171006 FA01214...
