Move the lower hinge and upper plastic bushing to the opposite ends of the
Place the plastic filler caps in the screw holes that previously held the lower hinge
Move the locking pin by fitting it in hole on the opposite side of the frame
and nylon bushings as shown.
BOTTOM HINGE
LOCKING
PIN
bw
Rev
ove the lower hinge and upper plastic bushing to the opposite ends of the
Place the plastic filler caps in the screw holes that previously held the lower hinge
ove the locking pin by fitting it in hole on the opposite side of the frame
and nylon bushings as shown.
PLASTIC CAPS
ev 07/04/2015
30
ove the lower hinge and upper plastic bushing to the opposite ends of the door.
Place the plastic filler caps in the screw holes that previously held the lower hinge
ove the locking pin by fitting it in hole on the opposite side of the frame panel. Fit pins
PLASTIC CAPS
LOCKING
Ω
RING
LOCKING
PIN
Summary of Contents for GBC-15
