64 78 759 D3608
D3608
.
201.01.07
.
02 10.2017
47
Dentsply Sirona
5 Commissioning
Operating Instructions inLab MC X5
5.2 Putting the unit into operation
båÖäáëÜ
5.2.7.2.1
Editing inLab MC X5 device settings
Via menu item
"inLab MC X5"
/ unit name you can make or view the
following changes retroactively:
● Name/ description
● Connection settings
– Automatic IP setting
– Manual IP settings
– Display of the MAC address
● Suction
– Sirona suction
– External suction
● Use spindle touch
– Spindle run time (h): Shows how long the tool spindle has been
in use
– Spindle ID: Shows the type of tool spindle. This is particularly
important for selecting a suitable replacement collect chuck
(blue: type 1; green: type 2)
● External tank
● Firmware download
5.2.7.2.1.1
Device settings
Manual IP settings
The IP address can be changed in order to integrate the machine into
existing networks. To do this, proceed as follows:
1. Establish a direct connection with the inLab 4 PC (see Installing the
2. If you want to change the static IP address, click
"Edit Device
Settings"
.
3. Enter the network settings in accordance with your local network
configuration.
4. Confirm the new network settings using
"Ok"
or press
"Cancel"
in
order not to save the changed settings.
5. Disconnect the Ethernet connection with the PC and connect the
machine to the network socket in your local network (see Connecting
