64 78 759 D3608
26
D3608
.
201.01.07
.
02 10.2017
3 Safety information
Dentsply Sirona
3.4 Connecting the unit
Operating Instructions inLab MC X5
3.4
Connecting the unit
Perform connection by following the directions given in the present
operating instructions.
3.5
Connection of external equipment
If any equipment not approved by Sirona is connected, it must comply
with the applicable standards:
● EN 60 950 for information technology equipment, and
● EN 61 010-1 for laboratory equipment.
3.6
Ventilation slots
Under no circumstances may the ventilation slots on the unit be covered,
since otherwise the air circulation will be obstructed. This can cause the
unit to overheat.
Do not spray into the ventilation slots
Do not spray liquids such as disinfectants into the ventilation slots. This
may lead to malfunctions. Use wipe disinfection only in the vicinity of the
ventilation slots.
3.7
Opening the processing chamber door
For safety reasons, the door lock is only released 15 seconds after
disengaging the tool mandrel.
CAUTION
Processing chamber is lit up red
The processing chamber is lit up red in the case of any failure.
➢ Turn off the machine at the main switch before you reach out to the
processing chamber. You can restart the machine once the error is
eliminated.
