DENT Instruments powerscout 3037 Operator'S Manual Download Page 37

Page: 37 / 107



The PowerScout 3037 can also be mounted on a 35 mm width DIN rail.

Top hat rail EN 50022

Wiring Connections on the PowerScout 3037

High voltage MAY BE PRESENT. Risk of electric shock. Life threatening voltages may be present.

Qualified personnel only.

Haute tension peut être présente. Risque de choc électrique. Tensions dangereuses peuvent

être présentes. Personnel qualifié uniquement.

PowerScout 3037 meters have the following connections:



USB port for powering the meter and communicating during setup, a three-wire connector for

the RS-485 BACnet/Modbus link, and an Ethernet port (optional).



Digital output port. The port can be used to output kWh, kVARh, or kVAh pulses to external

devices, or to toggle on and off to control a remote device or relay.



Three CT inputs.



Four voltage connections. Voltage leads are customer supplied. PowerScout meters are self-

powered from L1 and L2.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for powerscout 3037












































































































Search results

Summary of Contents for powerscout 3037

Reviews:

Related manuals for powerscout 3037

Brands by name

Popular brands

DENT Instruments powerscout 3037, Operator'S Manual

Search results

Summary of Contents for powerscout 3037

Reviews:

Related manuals for powerscout 3037

Brands by name

Popular brands