DENT Instruments powerscout 3037 Operator'S Manual Download Page 91

Page: 91 / 107

Appendix C—Firmware Updates

NSTALLING

IRMWARE

PDATES FOR THE

OWER

COUT

PowerScout firmware updates are available from DENT Instruments, typically contained in a zip file that

can be downloaded, unzipped and installed using ViewPoint. The PowerScout 3037 requires ViewPoint

4.1 or later.
Check the DENT Instruments website for the latest version of

firmware:

http://www.dentinstruments.com/downloads_data_logger_power

_meter_drivers_software.html

OWNLOADING AND

NSTALLING

IRMWARE

1) Download the zip file containing the firmware. Extract the zip file to a

folder on the computer.

2) Connect the computer to the PowerScout meter. Refer to

Firmware

the end of the

Field Installation

section. If connectivity fails with the 9600

baud rate, refer to the Troubleshooting section in Appendix G.

3) Select the baud rate for loading the firmware to the PowerScout meter. A baud rate of 9600

downloads the firmware to the PowerScout in approximately six minutes. A faster baud rate can be

selected to reduce the time by approximately 2.5 minutes. Change the baud rate using the

Communications

tab and selecting the desired baud rate. The baud rate is synchronized between

ViewPoint and the PowerScout meter by clicking the

Connect

button.

4) Select the

Firmware

tab in ViewPoint. Click

Browse

to locate the extracted firmware files. Click

Update

to start the firmware update.

ViewPoint displays a message window confirming a successful update when the update completes.
5) If the baud rate was changed via an RS-485 for the firmware update, restore the baud rate to its

original setting.

NOW

not using a USB

connection, the

PowerScout must be

in Modbus mode

before firmware can

be updated.

When connected via RS-485, select

the baud rate of 115200.

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for powerscout 3037












































































































Search results

Summary of Contents for powerscout 3037

Reviews:

Related manuals for powerscout 3037

Brands by name

Popular brands

DENT Instruments powerscout 3037, Operator'S Manual

Search results

Summary of Contents for powerscout 3037

Reviews:

Related manuals for powerscout 3037

Brands by name

Popular brands