Denso SE1-BB, User Manual, Page: 81 / 86

68
Appendix 1 Specifications
Item SE1-BB
Readable codes EAN-13, EAN-8, UPC-A, UPC-E, UPC/EAN with add-on, Interleaved 2
of 5, Standard 2 of 5, Code 32, Code 39, Codabar (NW-7), Code 93,
Code 128, GS1-128 (EAN-128), MSI, Plessey, GS1 DataBar
Omnidirectional (RSS-14), GS1 DataBar Truncated (RSS-14
Truncated), GS1 DataBar Stacked (RSS-14 Stacked), GS1 DataBar
Stacked Omnidirectional (RSS-14 Stacked Omnidirectional), GS1
DataBar Limited (RSS Limited), GS1 DataBar Expanded (RSS
Expanded)
， GS1 DataBar Expanded Stacked (RSS Expanded Stacked)
Scanning direction Barcodes can be read in both forward and reverse directions.
Scanning resolution 0.125 mm min.
Elevation angle (skew) ±50

(

1)
Tilt angle (pitch) ±50

(

1)
Light source LED (red)
Scanning
specifications
Reading confirmation Blue LED, and beeper
Bluetooth
®
Built-in Bluetooth
®
wireless device compliant with Bluetooth
®
Specification Ver. 2.1+EDR
Interface
Profile(s) supported SPP (Serial Port Profile)
HID (Human Interface Device Profile)
Input power
requirements Main power LR6 (AA) alkaline battery (× 2) or AA rechargeable nickel-metal
hydride battery (× 2)
(A rechargeable nickel-metal hydride battery eneloop
®
(battery capacity
1900 mAh or equivalent) is recommended. Make sure that the
rechargeable nickel-metal hydride battery is the correct capacity before
use.)
Operating time 100 hours (

2)
Operating temperature
range -5

to 50

C
Operating humidity range 10% to 90% RH (

3)
Storage temperature range -10

to 60

C
Storage humidity range 5% to 95% RH (

3)
Environmental
conditions
Ambient illuminance
range 10,000 lux or less
Dimensions (W) × (D) × (H) 100 × 41 × 27 mm (3.9 × 1.6 × 1.1 inches)
Weight Approx. 60 g (excluding the batteries)
(

1) When EAN-13, EAN-8 labels meeting EAN SYMBOL SPECIFICATIONS (1.0×, space reflectance 0.8, bar reflectance 0.1) are used
(

2) Reference values obtained by in-house measurement
· Battery in use: AA rechargeable nickel-metal hydride battery eneloop
®
battery capacity 1900 mAh. Fresh batteries are fully charged after
refreshing by the dedicated charger.
· Connection target: BA series communications adapter
· Code scanning is repeated every five seconds.
(

3) Sharp temperature change, dewing or freezing not allowed, wet-bulb temperature 30

C max.