Denso SE1-BB, User Manual, Page: 25 / 86

12
3.3 Breaking Bluetooth
®
Wireless Links
Holding down the magic key for at least five seconds or scanning the “Break Bluetooth
®
wireless link” Bar Code symbol
forcibly breaks the scanner’s Bluetooth
®
wireless link. (The Bar Code symbol is given in Section 11.2 and its procedure in
Section 11.1.)
Note: Breaking the Bluetooth
®
wireless link does not disable the Bluetooth
®
interface. To disable it, scan the “End
operation” Bar Code symbol given in Section 11.2 and its procedure in Section 11.1.
3.4 Re-establishing Bluetooth
®
Wireless Links
When the scanner’s Bluetooth
®
wireless link has been broken by any of the following events, pressing the trigger switch or
the magic key reestablishes the Bluetooth
®
wireless link. The scanner as a slave waits for a connection request from the
master; the scanner as a master connects to a target slave.
· When “Scan w/ Bluetooth
®
link broken” is set, scan the “Scan w/ Bluetooth
®
link broken” Bar Code symbol given in
Section 11.2 and its procedure in Section 11.1, scan the Cancel “Scan w/ Bluetooth
®
link broken” Bar Code symbol to
set cancel and then press the trigger switch.
· When the scanner was turned off by an auto power-off, press the magic key.
· When the Bluetooth
®
communications parameters are modified in the configuration software (Scan Tune App), press the
trigger switch.
· When the “Reconnect request” dialog box is displayed by the configuration software (Scan Tune App), press the trigger
switch.
· When the battery is replaced, press the magic key.
3.5 Indication of Bluetooth
®
Wireless Link Status
The scanner’s indicator LED and beeper together indicate the status of the scanner’s Bluetooth
®
wireless link.
When the trigger switch is held down:
Indicator LED Beeper Scanner Status
Red, flashing Scanning was performed when there was a Bluetooth
®
wireless
link on enabling the link.
Red, flashing twice
repeatedly
The scanner has scanned the “End operation” Bar Code symbol.
Not turn on
Silent
Scanner power is off