Denso SE1-BB, User Manual, Page: 55 / 86

42
(8) Data transmission format common to all interfaces
Items Parameters Defaults Refer to:
Enable
Transmission of code ID mark
Disable *
Section 9.4 (2)
Enable
Transmission of the number of digits
(not applicable to UPC/EAN codes)
Disable *
Section 9.4 (3)
(9) Inverted codes
Items Parameters Defaults Refer to:
Black cells/bars on a white background *
Reading black-and-white inverted
codes
Auto detection of black and white inverted
codes
Section 7.2
(10) Barcodes
UPC-A/E, EAN-13/8
Items Parameters Defaults Refer to:
Enable *
Scanning UPC-A
and EAN-13
Disable
Section 11.2
Enable *
UPC-A transmission of check digit
Disable
Enable *
UPC-A transmission of number
system character
Disable
Enable *
UPC-A transmission of the leading
character
Disable
Section 9.4 (4)
Enable *
EAN-13 transmission of check digit
Disable
Section 9.4 (4)
Enable *
EAN-13 transmission of country code
Disable
(See Note 1.)
Enable
EAN-13 conversion to the ISBN /
ISSN format
Disable *
Enable *
Reading UPC-E
Disable
Section 11.2
Enable *
UPC-E transmission of check digit
Disable
Enable *
UPC-E transmission of number
system character
Disable
Enable
UPC-E transmission of the leading
character
Disable *
Enable
UPC-E conversion to the UPC-A
format
Disable *
Section 9.4 (4)
(Note 1) A country code is in the upper two digits of the prefix character field in EAN-13.
: Can be changed only with the configuration software.