Denso SE1-BB, User Manual, Page: 44 / 86

31
(2) Code ID mark
This optional field specifies the code system.
You can also select whether or not to transmit the code ID mark. (The default is “Disable”)
Code type Code ID mark
Without add-on A
Linear component A
With 2-digit add-on
Add-on None
Linear component A
UPC-A
With 5-digit add-on
Add-on None
Without add-on
Linear component
C
With 2-digit add-on
Add-on None
Linear component C
UPC-E
With 5-digit add-on
Add-on None
Without add-on
Linear component
A
With 2-digit add-on
Add-on None
Linear component A
EAN-13
With 5-digit add-on
Add-on None
Without add-on
Linear component
B
With 2-digit add-on
Add-on None
Linear component B
EAN-8
With 5-digit add-on
Add-on None
Standard 2 of 5 (short) H
Standard 2 of 5 (normal) H
Interleaved 2 of 5 I
Code 39 M
Code 39 Full ASCII M
Code 32 M
Codabar (NW-7) N
Code 93 L
Code 128 K
GS1-128 (EAN-128) W
MSI P
Pleassey T
GS1 DataBar (RSS) (Note 1) R
(Note 1) “GS1 DataBar (RSS)” refers to all of the following codes: GS1 DataBar Omnidirectional (RSS-14),
GS1 DataBar Truncated (RSS-14 Truncated), GS1 DataBar Limited (RSS-14 Limited), GS1 DataBar Stacked (RSS-14
Stacked), GS1 DataBar Expanded (RSS Expanded), GS1 DataBar Stacked Omnidirectional (RSS-14 Stacked
Omnidirectional), GS1 DataBar Expanded Stacked (RSS Expanded Stacked)