Denso SE1-BB, User Manual, Page: 56 / 86

43
Items Parameters Defaults Refer to:
Enable *
Reading EAN-8
Disable
Section 11.2
Enable *
EAN-8 transmission of check digit
Disable
Enable
EAN-8 Conversion to the EAN-13
format
Disable *
Section 9.4 (4)
Enable
Reading UPC/EAN with 2-digit
add-on
Disable *
Enable
Reading UPC/EAN with 5-digit
add-on
Disable *
Enable
Reading UPC/EAN with add-on only
Disable *
Disable *
Add-on check level
Levels 1 to 3
Section 9.4 (4)
Interleaved 2 of 5
Items Parameters Defaults Refer to:
Enable, without the check digit *
Enable, with the check digit
Reading Interleaved 2 of 5
Disable
Enable *
Interleaved 2 of 5 transmission of
check digit
Disable
Section 11.2
Minimum number of readable digits
for Interleaved 2 of 5
4 digits
Maximum number of readable digits
for Interleaved 2 of 5
4 to 99 digits
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
Standard 2 of 5
Items Parameters Defaults Refer to:
Enable, without the check digit
Enable, with the check digit
Reading Standard 2 of 5
Disable *
Enable *
Standard 2 of 5 transmission of
check digit
Disable
Section 11.2
Minimum number of readable digits
for Standard 2 of 5
3 digits
Maximum number of readable digits
for Standard 2 of 5
3 to 99 digits
99 digits
(See Note 1.)
(Note 1) The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
: Can be changed only with the configuration software.