Denso SE1-BB, User Manual, Page: 63 / 86

50
11.2 Bar-coded Parameter Menu
The beeper volume can be set by scanning the following Bar Code symbol only. No “Start setting” or “End setting”
Bar Code symbol is required to be scanned.
Adjusting the beeper volume
Scanning this Bar Code symbol cycles the beeper volume through High, Medium and Low.
The factory default is High.
Beeper volume
To set the parameters, simply scan the Bar codes below. Scanning “Start setting” Bar Code symbol and “End
setting” Bar Code symbol is not required.
Easy connection setup
To set the connection corresponding to the connected device, simply scan the barcodes below.
(The connected device should be equipped with a Bluetooth
®
module that is compatible with Bluetooth
®
Specification Ver. 2.1+EDR.)
iPhone, iPad
(HID Profile)
Android (HID Profile)
Android, Windows PC (SPP Profile)
Windows PC (HID Profile)